Sharebot Next Generation XXL+
user's manual
Let's print!
Press the control knob and select "SD card menu".
You can now read the contenent of the SD card, files and folders. Chose the file you want to print by pressing the control knob on it, and the printing process starts.
Your Sharebot XXL+ starts heating the extruder and the printing bed while executing an auto-home, then reched the setted extruder temperature, it will start
p rinting t he first la yer. It is crucial to check the first perimeters of the first layer: the filamen t has to stick to the printing bed, not too close, not too far and so
circular. It is possible to make changes to the calibration while printing, if needed, paying attention not interfere with the screwdriver the XY carriage
movements.
Stop the printing process
During printing you can pause or quit printing. The two options are available directly from the main menu displayed as "Pause print" and "Stop print".
Remember that in the first case is only paused the printing process (this operation may take a few seconds) waiting for you to give the command "Resume print". Pay
attention: if you pause the printing process, you may damage the printed part where the extruder stops due to his temperature and to the spillage of melted material.
Therefore, the pause is to be used only in case of necessity and just for short periods. We recommend to activate it while the extruder is tracing a filling so that the
spillage remains hidden within the object.
In the second case, the printing process stops immediately and can no longer continue; then the extruder executes an auto-home.
Modify the parameters during printing
One of the characteristics of Sharebot XXL+ is the possibility to act on a number of parameters while printing is in progress.
During printing, the "Tune" menu becomes available instead of the "Prepare" (see chapter 3): this allows you take action by changing the temperatures
of the nozzle and plate, modify the fan speed or change the filament.
Sharebot srl
Nibionno Italy
All rights reserved
. No part of this manual
may be reproduced or transmitted in any form or by any means without prior permission
page 25