Sharebot Next Generation XXL+
user's manual
3 - LCD screen
Sharebot XXL+ is a printer that supports both printing stand-alone both control from one computer (OS X, Windows or Linux). In both cases the LCD screen provides
functions both for consultation both editing.
Our suggestion is to
print always in stand-alone mode, saving gcodes on the SD card.
Informative screen
When the printer is on - printing or waiting for comands – dispays the
following information on the four rows:
The first row contains the actual extruder temperature followed by the
one setted; on the right of the same row is displayed in the same way
the temperature of the heated bed. The temperature is in degrees
Celsius.
The second row displays the current position of the extruder and the z-
axis. The values are in millimetres, with two decimals indicate
hundredths of millimetres.
The third row has on the left the percentage control of speeds: turning the control knob we modify in percentage all the different speeds that are present in the gcode.
On the same row but in the middle is displayed the progress percentage of the printing and on the right of the same row is displayed the time elapsed in hours and
minutes.
The fourth line contains messages that can be generated by the G-Code file with a special command, or messages from the firmware about specific situations . Once the
printing is concluded we will find the real printing time on this row.
Sharebot srl
Nibionno Italy
All rights reserved
. No part of this manual
may be reproduced or transmitted in any form or by any means without prior permission
page 16