Sharebot Next Generation XXL+
user's manual
The Control knob
To the right of the LCD there is a knob which rotates with small clicks and can be pressed as a button. With this knob you can interact with Sharebot XXL+: turning it
clockwise you decrease the selected value, turning it anticlockwise it increases. During menu scrolling, rotation anticlockwise flows downward and vice versa. When the
LCD is on the information screen, the rotation of the knob acts on FR percentage, increasing or decreasing the speed of all the movements and so the printing speed.
Access to principal menu
Pressing the control knob, you access the main menu. Remember that the menu displayed depends on the state of the printer: if it is waiting to run offers the menu
“prepare”, while if you are printing offers the menu “adapt”. The voices and the features available in these two modes are different.
Printer waiting for work
Info Screen
Prepare
SD Card Menu
Reset
Printer during printing
Info Screen
Tune
Pause print
Stop print
Reset
Sharebot srl
Nibionno Italy
All rights reserved
. No part of this manual
may be reproduced or transmitted in any form or by any means without prior permission
page 17