Shandong New Beiyang Information Technology Co. BK-T080III, User Manual

Page: 9 / 45

BK-T080III (vertical) User’s Manual
- 3 -
Items Parameter (203dpi)
Paper out mode Paper retraction /paper holding/close/paper ejection (optional)
Print head lifetime ≥ 100 Km
Cutter lifetime ≥ 1,500,000 cuts (65um thermal paper)
MTBF (main control
board)
360,000 hours
Reliability
MTBF (printer) 5,000 hours
Operation environment
0 ～ 50 , 20 ℃ ～ 90%RH (40 ) ℃
Environment
Storage environment -40 ～ 60 , 20 ℃ ～ 93% RH (40 ) ℃
Overall size 287.2(L) X 135(W) X 279(H)
Physics Character
Weight About 2.11Kg (without paper roll)
Table 2.1 Technical specification
Notes:
1) DPI: dots printed for each inch. (One inch is about 25.4mm)
2) The real print speed is related with data transmission speed, print darkness, print duty ratio, control
commands and input voltage, which may be lower than that in above table.
3) PRESENTER is used to accommodate paper, and it is located at the front end of printer.
2.2 Paper specification
z Paper type: Continuous paper/marked paper
z Paper supply method: Paper roll
z Paper width: 69.5~79.5±0.5 mm
z
Paper thickness: 60um~100um
z Thermal layer: Outside, inside (diameter of paper roll up to Φ 40mm)
z Paper roll specification:
Optional paper roll ID: Φ 18, Φ 25, Φ 40mm
Max. paper roll OD: Φ 180mm
z
Recommended paper:
¾ Continuous paper specification:
Paper type Manufacturer
TF50KS － E2C NIPPON PAPER INDUSTRIES CO., LTD.
F240AC/F220-VP MITSUBISHI PAPER MILL CO., LTD.
KF060-FEAH NEW OJI Paper CO., LTD.
F70NA FUJI PHOTO FILM CO., LTD.
FV230A1 MITSUBISHI PAPER MILL CO., LTD.
Table 2.2-1 Printer recommended paper
Notes:
1) The weight shaft is an accessory part of BK-T080III (vertical) printer, and whether it should be installed
depending on the paper specification greatly.
2) The width of ticket that BK-T080III (vertical) printer adapts to is related with paper specification greatly
as below: