BK-T080III (vertical) User’s Manual
- 15 -
Caution:
z
Make sure the interface cable is connected in correct direction.
z
When connecting or disconnecting the interface cable, make sure to hold the plug shell instead of
dragging the cable forcibly.
4.6 Installing and loading the paper roll
Before installing the paper roll, make sure the specification of paper roll is in conformity with requirements
of printer (refer to 2.2 Paper specification).
4.6.1 Steps to install the paper roll
¾
Refer to Figure 4.6-1, take off the paper roll baffle in the arrow direction. When the paper roll ID is
25.4mm or 40mm, you should install corresponding paper roll shaft sleeve onto the position as shown
in the figure and fasten the self-tapping screw in the arrow direction with cross screw driver;
Figure 4.6-1 Installing the paper roll shaft sleeve
¾
Refer to Figure 4.6-2, install the paper roll onto the paper roll shaft in the arrow direction;
Figure 4.6-2 Installing the paper roll
