BK-T080III (vertical) User’s Manual
- 14 -
4.4 Connecting AC power adapter
1) Make sure the printer is turned off.
2) Plug the power adapter cable pin into the power socket on the bottom of printer (see Figure 4.4-1
Power adapter connection).
3) Connect the AC power adapter to an electrical outlet.
Figure 4.4-1 Power adapter connection
Caution:
z
Use recommended power adapter or its equivalents;
z
Be careful to the angle of pin and socket while connecting or disconnecting the connector of power
adapter.
z
When connecting or disconnecting the connector of AC power adapter, always hold the connector shell
and don’t pull the cable forcibly.
z
Avoid dragging or pulling the cable of AC adapter, otherwise the cable may be damaged or broken,
and a fire and electric shocking may be caused accordingly.
z
Avoid placing the power adapter near an overheating device, otherwise the surface of cable may melt
and cause a fire or electric shock.
z
If leaving the printer idle for a long time, please disconnect the power of AC adapter.
4.5 Connecting interface cable
1. Make sure that the printer has been shut down, (sign “O” in power switch is pressed down);
2. Plug the USB cable into relevant interface of the printer, (see Figure 4.5-1);
3. Connect the other end of the interface cable to the host computer.
Figure4.5-1 USB cable connection
