BK-T080III (vertical) User’s Manual
- 25 -
3) Refer to Figure 5.1-3, hold the Presenter shown in item1 with hands and pull it forcibly in the arrow
direction shown in the following figure until the Presenter turns to the position shown in item 2 of
the following figure;
Figure 5.1-3 Cleaning mark sensor
4) Pull out the print cable and FFC from corresponding socket according to the arrow shown in
Figure 5.1-4;
Figure 5.1-4 Cleaning mark sensor
5) Unscrew the four M3-4 screws shown as in Figure 5.1-5 with a cross screw driver, then lift up the
print module and take it away as shown in Figure 5.1-5;
Figure 5.1-5 Cleaning mark sensor
