SGM P-6, User Manual

Page: 31 / 39

31
Product Version 1.0 | Revision E | Released 2022-12-09
SUPPORTED RDM FUNCTIONS
The P-6 Series features support for various RDM functions.
RDM (Remote Device Management) is a protocol enhancement to USITT DMX512 that allows bi-directional commu-
nication
between the fixtures and the controller over a standard DMX line. This protocol will allow configuration, status
monitoring, and management.
A RDM controller is needed to get control over the supported parameters. See the tables below for supported RDM
functions.
PLEASE NOTE! THE RDM CONTROLLER COMMUNICATES WITH THE FIXTURES TO SHOW ONLY THE AVAILABLE
OPTIONS FOR EACH RDM FUNCTION. TABLES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
SENSORS
RDM enables various sensor readouts for remote device monitoring. See the table below for sensors and sensor types.
PLEASE NOTE! THE RDM CONTROLLER COMMUNICATES WITH THE FIXTURES TO SHOW ONLY THE AVAILABLE
SENSORS FOR THIS FIXTURE. THE TABLE IS SUBJECT TO CHANGE WITHOUT NOTICE.
RDM
PID ACTIONS
ALLOWED
NAME
0x0082 GET/ SET Device Label
0x0081 GET Manufacturer Label
0x00E0 GET/ SET DMX Personality
0x00E1 GET DMX Personality description
0x0200 GET Sensor Definition
0x0201 GET/ SET Sensor Value
0x0080 GET Device Model Description
0x0400 GET/ SET Device Hours
0x0401 GET/ SET Lamp Hours
0x0051 GET Parameter Description
0x0501 GET/ SET Display Level
0x0500 GET/ SET Display Invert
0x0090 GET/ SET Factory Defaults
0x1001 SET Reset Device
0x0120 GET Slot Info
0x0121 GET Slot Description
0x0122 GET Default Slot Value
0x0030 GET Status Messages
0x0031 GET Status Id Description
PID ACTIONS
ALLOWED
NAME
0x8626 SET CRMX Log Off
0x8060 GET Serial Nr.
0x8632 GET/ SET SMPS Calibration
0x8625 GET/ SET FAN 0=AUTO 1=LOW NOISE
2=OFF
0x8634 GET/ SET LOSS 0=HO 1=WHI 2=OF 3=QC
4=HO5
0x8635 GET/ SET START 0=DMX 1=QC 2=MAC
3-5=PRG
0x8636 GET Active Error
0x8637 GET/ SET BRIDGE 1=ENABLE 2=DISA-
BLE
0x8639 GET/ SET POI-LED 1=ENABLE 2=DISA-
BLE
0x863A GET/ SET 100W-LIMIT 1=ENABLE 2=DIS-
ABLE
0x8638 GET/ SET KEYPAD LOCK EN=1 DIS=2
0x863B GET / SET PRIOR-WIREL 1=ENABLE
2=DISABLE
0x863D GET / SET OPERATION-MODE LEG=0
STD=1
0x863C GET / SET FAST SPEED 0=DISABLE
1=ENABLE
0x863E GET / SET Fan Calibration
NAME SENSOR TYPE
Mainboard Temperature
LED Left 1 Temperature
LED Left 2 Temperature
LED Left 3 Temperature
LED Right 1 Temperature
LED Right 2 Temperature
NAME SENSOR TYPE
Humidity Head Other
Wireless Signal Strength Other
Wireless Paired Other
Light PWM Other
Voltage Voltage
Fixture Derating Other