7
Product Version 1.0 | Revision E | Released 2022-12-09
BEFORE INSTALLING THIS PRODUCT
Please visit the SGM official website at www.sgmlight.com for the latest version of this user
manual/ safety information leaflet. Due to continuous improvements, the instructions may
change without notice. SGM always recommends the latest available firmware version from
www.sgmlight.com.
EXTERNAL CLEANING AND VISUAL INSPECTION OF THE FIXTURE
All users of SGM luminaires should regularly clean those parts of the luminaire directly exposed
to the elements, such as the external housing and front lenses. Additionally, all owners of SGM
luminaires must periodically check the external housing of the luminaire for structural breaks,
components in bad shape, cracked lenses, or loose screws. To ensure proper operation, but also
to prevent the risk of potential accidents, do not use the luminaire if the lens, housing, or power
cables are damaged. If parts of the luminaire appear to be missing, cease use immediately and
contact SGM support.
WIRING AND CONDUIT/ CONTAINMENT
SGM luminaires supplied with power and data cable leads are not intended for installation in
permanently installed conduit or containment. When installing luminaires in a permanent in-
stallation, ensure cable leads are installed as a service loop to an appropriately rated junction
box using suitable cable strain reliefs / glands. All installed luminaires must be securely mount-
ed and service loop appropriately protected for installation location. All electrical wiring and
connections should be completed by a qualified electrician.
SAFETY PRECAUTIONS
When using electrical equipment, basic safety precautions should always be followed including
the following:
• Do not mount near gas or electric heaters.
• Permanently installed equipment should be mounted in locations and at heights where
it will not readily be subjected to tampering by unauthorized personnel.
• The use of accessory equipment not recommended by the manufacturer may cause an
unsafe condition.
• Do not use this equipment for other than intended use.
• Refer service to qualified personnel or authorized service centers.
• Do not look directly into the beam for long periods of time, when the fixture is on.
• The luminaire shall, under no circumstance, be covered with insulating material of any
kind.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
