17
Accessories
Barndoors
The P-1 features optional 4-way and 8-way barndoors. The barndoors are designed and intended to be mounted on the fixture with
-
out the use of any tools.
To install the barndoors:
1. Pull the two lock pins to the unlocked position and place the barndoor on the front of the P-1 head.
2. Release the lock pins and check the lock pins are correctly in place.
3. Attach a safety wire to the barndoor and secure it to the yoke on the P-1.
The barndoor can be mounted simultaneously with a filter frame.
The P-1 can be used with various accessories such as cables, barndoors, and filter frames.
To get to know all the available P-1 accessories, visit www.sgmlight.com or contact your local SGM dealer.
Filter frames
The P-1 features various optional, magnetic holographic filter frames:
• Medium angle (19°)
• Wide angle (45°)
• Elliptical wide angle horizontal (63°x12°)
• Elliptical wide angle vertical (12°x63°)
The filter frames install easily using magnets built-in to the frames and fixtures. To install them, position the filter frame in front of the
light, and snap it into place.
The frames are fitted with a safety wire to secure the frame to the yoke on the P-1.
A filter frame can be mounted simultaneously with a barndoor.
For further information and other possibilities visit www.sgmlight.com or contact your local SGM dealer.
Lock pins
Safety wire attachment points
Filter frame front view
Filter frame back view
P-1 with filter frame
Figure 11: P-1 Barndoors
Figure 10: P-1 Filter frames
Summary of Contents for P-1
Page 1: ...USER MANUAL P 1 P 1 ...
