SGM P-1, User Manual

Page: 16 / 20

16
Supported RDM functions
The P-1 features support for various RDM functions, as per the ANSI E1.20 standard.
RDM (Remote Device Management) is a protocol enhancement to USITT DMX512 that allows bi-directional communication between
the fixtures and the controller over a standard DMX line. This protocol will allow configuration, status monitoring, and management.
A RDM enabled controller is required to control the supported parameters. See the tables below for supported RDM functions.
RDM functions
RDM
Name Sensor Type
Mainboard Temp. Temperature
LED Left Temperature
LED Right Temperature
Humidity Other
AC power connected Contacts
Battery PCT (percentage) Other
Battery charging Contacts
Battery voltage Voltage
Wireless signal strength Other
Name Sensor Type
Wireless paired Other
Red LED Hours Pixel 1 Time
Green LED Hours Pixel 1 Time
Blue LED Hours Pixel 1 Time
White LED Hours Pixel 1 Time
Red LED Hours Pixel 2 Time
Green LED Hours Pixel 2 Time
Blue LED Hours Pixel 2 Time
White LED Hours Pixel 2 Time
PID Actions Name
0x00F0 GET / SET DMX Start Address
0x00E0 GET / SET DMX Personality / Mode
0x00E1 GET DMX Personality Description
0x1000 GET / SET Identify
0x1001 SET Reset Device
0x0200 GET Sensor Definition
0x0201 GET / SET Sensor Value
0x0082 GET / SET Device Label
0x0081 GET Manufacturer Label
0x8060 GET Serial Number
0x0080 GET Device Model Description
0x0400 GET / SET Device Hours
0x0051 GET Parameter Description
PID Actions Name
0x0501 GET / SET Display Level, 0=OFF, 1 and above=ON
0x0500 GET / SET Display Invert
0x8626 SET CRMX Log Off
0x8631 GET / SET Battery Extension Hours
0x0090 SET Factory Defaults
0x0120 GET Slot Info
0x0121 GET Slot Description
0x0122 GET Default Slot Value
0x8637 GET / SET Bridge ENABLE=1 DISABLE=2
0x8620 GET / SET Led freq (197647Hz) / value
0x8634 GET / SET Quick color feature 0=HOLD 1=WHITE
2=OFF 3=Q COLOR
0x8636 GET Active Error
Please note:
The RDM controller communicates with the fixtures to show only the available options for each RDM function. The table is subject to change without notice.
Sensors
RDM enables various sensor readouts for remote device monitoring. See the table below for sensors and sensor types.
Please note:
The RDM controller communicates with the fixtures to show only the available sensors for this fixture. The table is subject to change without notice.