9
Product Version 1.0 | Revision E | Released 2023-01-11
UNPACKING
Unpack the device and inspect it to ensure that it has not been damaged during transport.
The G-7 Spot /
Standard version only
/ is shipped with:
• Power cable with power input connector, 2 m (78 in.).
• Two omega brackets with 1/4-turn fasteners.
• Safety information leaflet.
APPLICATION CONSIDERATIONS
The fixture is IP66-rated and designed for both indoor and outdoor events. This means that it is protected from:
• Dust, to the degree that dust cannot enter the device in sufficient quantities as to interfere with its operation.
• Water jets from any direction.
When selecting a location for the device, ensure that:
• It is situated away from public thoroughfares and protected from contact with people.
• It is not immersed in water.
• It has adequate ventilation.
• Will not be focused with the glass lenses towards the sun for extended periods of time.
When using the fixture with a DMX controller, ensure that:
• The DMX out of the last fixture is terminated with a 120 ohm resistor between pin 2 and 3, according to the
RS485 standard.
• The DMX out is properly sealed by mounting the protection cap in accordance with the ingress protection
(IP) requirements.
• A maximum of 32 fixtures can be connected to the same DMX link.
The DMX connection out of the last fixture in a chain is properly sealed, in accordance with the ingress protection
(IP) requirements.
The DMX out of the last fixture is terminated with a 120 Ohm resistor between pin 2 and 3 (as per RS485 standards).
TRANSPORT HANDLING
Always use the supplied packaging or suitable flight case for transportation and storage.
Release the tilt lock when transporting the fixture. Leaving the tilt lock blocked may cause damage to the fixture.
Never carry the fixture by connected cables or wires; use the handles.
