39
Product Version 1.0 | Revision E | Released 2023-01-11
Fixture firmware can be identified in two different ways:
Standard Fixture
• When powering on a standard fixture, the display
shows the current installed firmware version.
• Go to MENU → INFO → FIRMWARE VERSION (on
standard).
• Through RDM
POI Fixture
• Connect either Std or POI uploader cable depending
on which is more suitable for the installation
• Launch the SGM RDM Adressing Tool
• Click “Full Discovery” fixture should show in the
chart. Firmware will be displayed in the firmware
column
To update a fixture with the latest firmware, use an SGM
USB 5-Pin-XLR uploader cable, and a Windows-based
computer with the SGM Firmware Tool software installed
(available for download at www.sgmlight.com).
• Download the SGM Firmware Tool software from the
SGM website
• Download latest firmware file from product web
page on the SGM website
• Connect either Std or POI uploader cable depending
on which is more suitable for the installation
• Launch SGM Firmware Tool on a windows PC
• Click “File” then “Open” and navigate to the firm-
ware file needed, select it and click “Open”
• The firmware is now loaded in the uploader, click
“Upload Firmware”
The fixture will now update and reboot
The Firmware Tool software offers a simple DMX controller
featuring 512 DMX channels for test purposes.
FIRMWARE UPDATES
Figure 32: SGM Firmware tool
Figure 33: SGM Firmware tool
IT IS RECOMMENDED KEEP FIRMWARE UPDATED. THE LATEST FIRMWARE VERSION IS ALWAYS AVAILABLE FOR
DOWNLOAD UNDER THE RESPECTIVE PRODUCT AT WWW.SGMLIGHT.COM.
