56
SI 580E DIN SIZE WEIGHING CONTROLER
www.sewhacnm.co.kr
Under TEST Mode, Calibration mode and SET-POINT setting mode, the relay output
will be OFF.
Please check the optimal voltage of output terminal, if the high voltage power will be
connected with output terminal, it may cause damage or relay or main board of indicator.
6-2. Relay Output
4pcs Control Relay output is installed in Output Terminal.
You can make setting for these relay output through F21 function.. (A/B Dry Contact).
6-2-1. Relay Specification
6-2-2. Relay Output Diagram.
Coiling Rating
12VDC
Contact Ratings
1A 24VDC
