26
SI 580E DIN SIZE WEIGHING CONTROLER
www.sewhacnm.co.kr
■ Communication Mode Setting – Standard Serial port setting
Parity Bit selection Mode
F30
●
0
DATA Bit (8 Bit)
STOP Bit (1 Bit)
Parity Bit (Non)
1
DATA Bit (8 Bit)
STOP Bit (1 Bit)
Parity Bit (Odd)
2
DATA Bit (8 Bit)
STOP Bit (1 Bit)
Parity Bit (Even)
3
DATA Bit (8 Bit)
STOP Bit (2 Bit)
Parity Bit (Non)
4
DATA Bit (8 Bit)
STOP Bit (2 Bit)
Parity Bit (Odd)
5
DATA Bit (8 Bit)
STOP Bit (2 Bit)
Parity Bit (Even)
6
DATA Bit (7 Bit)
STOP Bit (1 Bit)
Parity Bit (Odd)
7
DATA Bit (7 Bit)
STOP Bit (1 Bit)
Parity Bit (Even)
8
DATA Bit (7 Bit)
STOP Bit (2 Bit)
Parity Bit (Odd)
9
DATA Bit (7 Bit)
STOP Bit (2 Bit)
Parity Bit (Even)
Serial Communication Speed selection
F31
0
2,400bps
5
28,800bps
1
4,800bps
6
38,400bps
●
2
9,600bps
7
57,600bps
3
14,400bps
8
76,800bps
4
19,200bps
9
115,200bps
DATA Transmition Method selection
F32
0
Simplex Mode / Stream Mode
●
1
Duplex Mode / Command Mode
2
Print Mode
“Check-Sum” detection selection (Under F32-01 setting, only)
F34
●
0
Check-Sum Not Use
1
Check-Sum Use
Under Stream Mode select the way transmit data protocol/frame (basic port)
F35
●
0
Transmit by Protocol
1
Transmit by frame (in case of using specific utility)
Caution : In case of “Transmit by frame” & under 14400bps setting(F31), the speed of
system will be slow.
DATA Transference Mode selection (Under F32-00 setting, only)
F36
●
0
Weighing Data will be transferred continuously
1
Single time data transference, at first steady point, over than Empty range.
2
Single time data transference, first weight steady point over than Empty range.
3
Data transference, Whenever “Print” key input
