6
3-2. Front Panel
3-2-1 Front Panel (Display / Key Pad)
3-2-1. Status Lamp
STEADY
When the weight is “STEADY”, Lamp is ON.
ZERO
When the current weight is ”ZERO”, Lamp is ON.
TARE
“TARE” function is set, Lamp is ON.
HOLD
“HOLD” function is set, Lamp is ON.
OUT1
When “OUT1”(Relay) operates, Lamp is ON
OUT2
When “OUT2”(Relay) operates, Lamp is ON
OUT3
When “OUT3”(Relay) operates, Lamp is ON
OUT4
When “OUT4”(Relay) operates, Lamp is ON
3-2-2. Key Operation
1. Normal Mode : Make Weight value as Zero. (F07, F08 setting)
2. Calibration Mode : Cancel the value or move to previous step.
3. F-Function setting : Cancel
4. Set point setting : Cancel
5.Test Mode 1 : Cancel or move to previous step
6.Test Mode 2 : Cancel or move to previous step
7.Set up Mode : Cancel
1.Normal Mode : Set the TARE Function .(F09 setting)
1
st
input : “TARE”, 2
nd
input : “TARE Reset”
(When “HOLD” or weight value is ZERO, then this key doesn’t work.)
2.Calibration Mode : Move to left
3.F-Function setting : Move to left
4. Set point setting : Set SP-1 value
Weight Display FND
