26
Paper Withdraw Rate setting (After SUB/GRAND Total Print)
F45
3
0~9 Whenever set value increased, 1 line will be added.
Paper Withdraw Rate setting (After Continuous/Single Print)
F46
3
0~9
Whenever set value increased, 1 line will be added.
Printing Language Selection
F47
●
0
KOREAN
1
ENGLISH
Minus(-) symbol Print selection
F49
●
0
Print minus(-) symbol, if the weight is minus(-).
1
Ignore minus(-) symbol
■ Extended Function Setting
Analogue Output Setting (4~20mA / 0~10V)
F50
●
0
Positive Output (Max. Capacity : 20mA output)
1
Negative Output (Max. Capacity : 4mA output)
Analogue Output Selection (20mA or 10V output point selection)
F51
●
0
Max. Capacity : 20mA or 10V will be output
1
SP1 set point : 20mA or 10V will be output
2
SP2 set point : 20mA or 10V will be output
3
SP3 set point : 20mA or 10V will be output
4
SP4 set point : 20mA or 10V will be output
“NEAR ZERO” relay output mode selection
F53
●
0
Display weight is Zero
Near Zero relay output
1
Only Gross Zero(Net TARE)
Near Zero relay output
Set time of “Average Hold”
F54
3
0~9
When setting “Average Hold”, set the time. (unit : sec)
※Automatic Hold Reset , After set time
■ Communication Mode Setting – Extended Serial Interface setting.
Parity Bit selection Mode(Extended Serial port)
F60
●
0
DATA Bit (8 Bit)
STOP Bit (1 Bit)
Parity Bit (Non)
1
DATA Bit (7 Bit)
STOP Bit (2 Bit)
Parity Bit (Non)
2
DATA Bit (7 Bit)
STOP Bit (1 Bit)
Parity Bit (Even)
3
DATA Bit (7 Bit)
STOP Bit (1 Bit)
Parity Bit (Odd)
4
DATA Bit (8 Bit)
STOP Bit (2 Bit)
Parity Bit (Non)
5
DATA Bit (8 Bit)
STOP Bit (1 Bit)
Parity Bit (Even)
6
DATA Bit (8 Bit)
STOP Bit (1 Bit)
Parity Bit (Odd)
