- 13 -
SI 560A DIN SIZE WEIGHING INDICATOR
5-1-3. “Decimal Point” and “Digit / Division” Value
Max decimal point will be 0.001, and digit can be selected among 1, 2, 5, 10, 20,
50. Digit and decimal point must be fulfilled under the below condition.
(division value / Max capacity value) cannot be over 1/20,000. If this condition is not
fulfilled, “
err-1
” will be displayed and move back to capacity setting mode.
5-1-4. Measuring the “DEAD” Weight of Weighing Scale.
After “DIVI” is displayed, locate decimal point with
key and
key. Set the
division with
key and
key, save
key to save.
When
“DEAD”
displays, Press
key, then indicator will calculate dead weight of
scale part automatically (While this process, there should be nothing on the scale part.)
