- 7 -
SI 560A DIN SIZE WEIGHING INDICATOR
3-2-3. Key Operation
1. Press this key 4times, within 3secs, enter to “SET-UP” mode.
2. Press this key during 4secs, enter to “Hidden function” mode.
3. Cancel or ESC.
1. Make weight value to Zero.
2. Enter to P/N setting at the SP value setting stage
1. Set the TARE Function
1
st
input : “TARE”, 2
nd
input : “TARE Reset”
(When “HOLD” or weight value is ZERO, then this key doesn’t work.)
2. Moving the cursor to left.
1. Set the “HOLD” Function
1
st
input : “HOLD”, 2
nd
input : “HOLD Reset”
※ When HOLD is on, “H” mark will be shown at the display.
2. Moving the cursor to right.
1. SP1 set value setting
2. Increase the value
1. SP2 set value setting
2. Decrease the value
1. Save
2. Manual print out key
