manualshive.com logo in svg

SEW-Eurodrive MOVIDRIVE DFP11A, Manual, Page: 7 / 52

Share
Download
SEW-Eurodrive MOVIDRIVE DFP11A Manual Download Page 7

MOVIDRIVE

®

  PROFIBUS DFP11A

7

Assembly / Installation 

Instructions

2

2

Assembly / Installation Instructions

2.1

Supported Drive Inverter Types

The DFP11 option pcb for connection to a PROFIBUS-FMS/DP system can be used with all drive
inverters of the MOVIDRIVE

®

   family.

2.2

Fitting the Option PCB

Before you begin:

• Discharge yourself with appropriate measures (earthing band, conductive shoes, etc.) before

touching the option pcb.

• Store the option pcb in the original package and only unpack immediately before installation.

• Do not touch the option pcb more often than necessary and hold only by the edges. Do not

touch components.

Installation of the option pcb :

• Disconnect inverter from the supply. Switch off mains and, if applicable, 24 V supply.

• Take off the lower protective cover of the control unit.

• Untighten screws of the electronics shielding terminal.

• Remove black sheet metal cover.

• Insert option pcb into the guide rails of OPTION1 or OPTION2 slots.

• Press the front plate carefully to plug in option pcb. The pcb is correctly inserted when the front

is flush with the controller pcb.

• Fasten electronics shielding terminal.

• Replace the protective cover of the control unit.

• Depending on the D type connector used, it may not be possible to replace the protective cover.

This does not effect the enclosure of the unit.

• The DFP11 option pcb is now completely fitted.

Summary of Contents for MOVIDRIVE DFP11A





















































Reviews:

No comments