46
MOVIDRIVE
®
PROFIBUS DFP11A
5
Parameter Adjustment
Return Codes
5.3
Internal Communications Error
The return code shown in Table 19 is returned if an internal communications error has occurred. It
may be that the parameter adjustment service transferred via fieldbus was not executed and should
be repeated. If this error recurs the drive inverter must be switched off and then on again to
reinitialize the unit.
Table 19: Return code if an internal communications error has occurred
Error rectification:
Repeat the READ or WRITE service. If the error recurs you should briefly disconnect the drive
inverter from the mains supply and then switch it on again. If the error persists, consult the SEW
Service Department.
Code (dec)
Meaning
Error class:
6
Access
Error code:
2
Hardware fault
Add. code high:
0
-
Add. code low:
0
-