2
MOVIDRIVE
®
PROFIBUS DFP11A
Important Notes
Important Notes
•
Read this Manual carefully before you start installation and commissioning work on
MOVIDRIVE
®
drive inverters with PROFIBUS.
This Manual assumes that the user is familiar with and has at his disposal all relevant docu-
mentation on the MOVIDRIVE
®
system, in particular the MOVIDRIVE
®
Manual and the
MOVIDRIVE
®
Installation and Operating Instructions.
•
Safety instructions:
Always follow the warnings and safety instructions contained in this Manual.
Safety instructions are marked as follows:
Mechanical hazard, e.g. when working on hoists.
Electrical hazard, e.g. during live working.
Important Instructions for the safe and fault-free operation of the driven machine /
system, e.g. pre-settings before commissioning.
•
General safety instructions for bus systems:
The fieldbus option provides you with a communications system which allows you to match
the MOVIDRIVE
®
drive inverter to the specifics of your application to a very high degree. As
with all bus systems there is, however, the risk of a programming error in the program,
which may result in unexpected (though not uncontrolled) system behaviour.
•
In this manual, cross-references are marked with a
→
e.g.,
(
→
MX_SCOPE) means: Please refer to the MX_SCOPE Manual for detailed information or
information on how to carry out this instruction.
(
→
Section x.x) means: Further information can be found in Section x.x of this Manual.
•
Each unit is manufactured and tested to current SEW-EURODRIVE technical standards and
specifications.
The manufacturer reserves the right to make changes to the technical data and designs
which are in the interest of technical progress.
A requirement for fault-free operation and fulfilment of any rights to claim under guarantee
is that these instructions and notes are followed.
•
When we prepared this documentation, great care was taken to make it as easy to follow as
possible so you could find all the information you need quickly and reliably. We would be
pleased to find that you are satisfied with this new documentation.
If you have any suggestions how we could improve this Manual even more to suit your
specific requirements, please feel free to contact us any time.
We look forward to hearing from you. Tel.: (+49) 7251 / 75-1120.