SEW-Eurodrive DHR41B, Manual

Page: 50 / 130

50
Manual – MOVI-PLC® advanced DHR41B for EtherNet/IP, Modbus/TCP and PROFINET IO
6
CIP object directory
The Ethernet Industrial Protocol (EtherNet/IP)
Ethernet link
object • Information on the Ethernet communication interface is stored in the Ethernet link ob-
ject.
• Class code: F6
hex
Class
Instance 1
Ethernet connec-
tion X30:1
Instance 2
Ethernet connec-
tion X30:2
Supported
services
Attri-
bute Access Name Data type Default
value [hex] Description
1 Get Revision UINT 0002 Revision 2
2 Get Max Instance UINT 0002 Maximum instance
3 Get Number of
Instances UINT 0002 DHR41B has two Ethernet interfaces
Attri-
bute Access Name Data type Default value
[hex]
Description
1 Get Interface
Speed UDINT 00000064 Default value = 100
→
Transmission
speed in Mbit/s
2 Get Interface
Flags DWORD • Bit 0 displays the active link
• Bit 1 displays full duplex mode
• Bit 2 ... bit 4 signal negotiation
status
• Bit 5 shows whether the manual
setting has to be reset
• Bit 6 indicates a local hardware
fault
3 Get Physical
Address ARRAY of
6 USINTs 00 0F 69 xx xx xx MAC ID
SEW MAC OUI: 00 0F 69
Attri-
bute Access Name Data type Default value [hex] Description
1 Get Interface
Speed UDINT 00000064 Default value = 100
→
Transmission
speed in Mbit/s
2 Get Interface
Flags DWORD • Bit 0 displays the active link
• Bit 1 displays full duplex mode
• Bit 2 bit 4 indicate the negotia-
tion status
• Bit 5 shows whether the manual
setting has to be reset
• Bit 6 indicates a local hardware
fault
3 Get Physical
Address ARRAY of
6 USINTs 00 0F 69 xx xx xx xx MAC ID
SEW MAC OUI: 00 0F 69
Service code [hex] Service Name Class Instance
01 Get_Attributes_All X _
0E Get_Attribute_Single X X
0 0
I