stepIM
11
Technical Training Manual
3
Communication
Exercise
1.
Activate ServoStudio software.
2.
If the ServoStudio has not yet been installed on the host computer,
download and install the software from this link:
http://www.servotronix.com/CDHD.html
3.
From the ServoStudio navigation sidebar, click
Preferences
. Then select
the
Advanced
tab
.
Make sure
CANopen Device
is set to
Kvaser Leaf
.
4.
From the ServoStudio navigation sidebar, select
Communication
.
The
Communication
screen is displayed.
5.
Select
Connect Addresses in Range
,
and press
Connect.
At the prompt, click
OK
.
Wait for the software to identify the connected drives:
6.
You should now see the
On-Line
button in the menu bar.
Summary of Contents for stepIM
Page 2: ......
Page 4: ...stepIM Technical Training Manual 2...
