background image

www.SerenLifeHome.com

9

• Conversions, independent modifications and the use of non-approved   

  parts are not permitted.

• Only use original replacement parts. Only these replacement parts are    

  designed and suitable for the device. Other replacement parts will not   
  only lead to an invalidation of the guarantee, they may also endanger you  
  and your environment. Always store the device in a dry location.

• If the machine is switched off for the purpose of maintenance, storage or  

  to replace an accessory, ensure that the plug has been pulled from the   

  socket. Ensure that all of the moving parts have come to a standstill and, if  

  there is a key, remove it. Allow the machine to cool down before carrying  
  out maintenance, adjustment work etc.

• Always allow the machine to cool down before storing.
• Never transport the unit with the engine running. Protect the device from  

  becoming damaged during transportation.

Personal Protective Clothing

                  Wear goggles and ear defenders.

                  When working with the tool, wear sturdy footwear.

                  Wear protective gloves when working with the device.

                  Wear close fitting clothes when working with the device.

Tool-Specific Notes

Risk of Electric Shock

              Warning: 

The cutting tools continue to rotate after the engine has  

             been switched off.

Failure to comply with the following instructions will lead to serious 
injury or death by electrocution.

Summary of Contents for PSLHTM65

























Reviews: