www.SerenLifeHome.com
11
and guards are in place. Labels that are damaged or cannot be read must
be replaced.
• Check, before switching
ON
, whether the blades are correctly mounted
and sit tightly.
• Never use the device without the feed hopper.
• If the chipper is blocked, first switch off the device, pull the plug out of the
socket and wait until the machine has come to a complete stand still
before removing the blockage. Keep the
ON/OFF
switch clean and free of
foreign objects.
• Never attempt to remove cut material or hold onto material being cut
while the blade is operating. Remove chippings/saw dust only when the
device has been switched
OFF
.
• Avoid direct contact with the rotating cutting blade. Keep hands and feet
away from the openings when the machine is running.
• Never put hands or other parts of the body or clothing into the feed
chamber, ejection channelor in the vicinity of other moving parts.
Risk of Injury!
Failure to comply with the following instructions will lead to serious
injury or death.
• Make sure that the filler funnel is empty before starting the machine.
• Always remove the cut material from the ejection zone before it piles up.
In this way, you avoid blocking the chipper or allowing cut material to
enter the feed hopper opening via kickback. This may lead to accidents.
• In the vicinity of 3m around the cutting area, there should be no people or
animals as they maybe hurt by flying objects.
• Never operate the unit on tiled or cemented surfaces.
The cut material may rebound andcause injuries.
• Ensure that the
ON/OFF
switch is set to "
Off
" when you put the plug into
the socket.
