www.SerenLifeHome.com
17
3. Wait until all the material has been shredder before adding more material.
NOTE:
Your fingers must never enter the in-feed chute.
NOTE:
Never use the tool if the hopper is not fitted.
NOTE:
Do not over reach.
How do I collect the shredded material?
•
Shut-off the power unit before attaching or removing the bag.
•
You can use either the collection bag supplied (if supplied) or place the
shredder on a tarpaulin sheet to catch the shredded material.
•
When using the collection bag, you need to fit the collection bag hooks
onto the sides of the discharge chute
Warning:
The ventilation slots on the machine body must never be covered
by the collection bag or shredded material.
How do I replace the blades?
1. Ensure that the shredder is switched off and disconnected from the
mains supply.
2. Remove the top feed assembly by unscrewing the reamer knob securing
it to the body of the machine.
3. The blades have two cutting edges.
Figure 8
The round hale at the entrance
Figure 9
Plunger
Material