background image

www.SerenLifeHome.com

5

Safe Operating Practices

            

General Warning!

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge,  unless they have been given supervision or instruction 

concerning use of the  appliance by a person responsible for their safety. 

Children should be supervised to ensure that they do not play with the 

appliance.

Training

Become familiar with the owner's manual before attempting to operate this 

equipment.

Preparation

1. Do not allow children to operate this equipment

2. Do not operate this equipment in the vicinity of bystanders

3. Wear ear protection and safety glasses at all times while operating the     

    machine

4. Avoid wearing clothing that is loose fitting or that has hanging cords or    

    ties

5. Only operate the machine in open space (e.g. not close to a wall or other  

    fixed object) and on a firm, level surface

6. Do not operate the machine on a paved or gravel surface where ejected  

    material could cause injury

7. Before starting the machine, check that all screws, nuts, bolts, and other  

    fasteners are properly secured and that guards and screens are in place.  

    Replace damaged or unreadable labels.

Maintenance and Storage

1. When the machine is stopped for servicing, inspection, or storage, or to     

    change an accessory, shut off the power source, disconnect the unit from  

    the power supply, make sure that all moving parts have come to a 

    complete stop and where a key is fitted remove the key. Allow the  

 

    machine to cool before making any inspections, adjustments, etc.

2. Always allow the machine to cool before storing;

Summary of Contents for PSLHTM65

























Reviews: