8
www.SerenLifeHome.com
• Do not use an electrical tool with a defective switch. An electrical tool that
cannot be switched on or off is dangerous and must be repaired.
• Pull the plug out of the socket and/or remove the battery before making
any settings to the device, changing accessories or putting the tool down.
These safety measures will help to prevent unintentional starting of the
electrical tool.
• Keep electrical tools that are not in use well out of the reach of children.
Do not allow people who are unfamiliar with the device or who have not
read these instructions to use the device. Electrical tools are dangerous if
they are used by inexperienced persons.
• Take good care of your electrical tools. Check whether the moving parts
function with no difficulties and do not jam, check whether parts are
broken or damaged in such a way that the functionality of the electrical
tool is impaired. Have damaged parts repaired before using the device.
Many accidents are caused by badly maintained electrical tools.
• Ensure that your cutting tools are sharp and clean. Properly cared for
cutting tools with sharp cutting edges are less likely to become jammed
and are easier to operate.
• Use the electrical tool, accessories, adjustment tools etc in accordance
with these instructions. Take the working conditions and the tasks to be
completed into account. The use of electrical tools for tasks other than the
one they are intended for can lead to dangerous situations.
Service
• Only have your electrical tools repaired by qualified specialists and with
original replacement parts.This ensures that the safety of the electrical tool
is maintained.
• Before conducting any maintenance, make sure the device is unplugged
(disconnect the power supply) and wait until the blade shaft is at a
complete standstill. Allow the device to cool down before doing anything.
• Only those maintenance and fault elimination tasks described here, may
be carried out. Any other tasks must be completed by a specialist.
• Check all screws regularly to ensure that they sit tight.
