10
www.SerenLifeHome.com
• Before use, check the mains and extension cables for damages.
Pay attention to age and state.
• Never operate the device in a damp or wet environment. Never work in
the rain. Never feed wet leaves into the unit.
• Make sure the connection cable is always kept out of the working range of
the device. Makesure that cables always lead away from the rear of the
device.
• The device may only be connected to a socket that is correctly installed
and grounded.
• The fuse must be a residual current circuit-breaker with a measured
residual current of no more than 30mA .
• Make sure that the power supply corresponds with the connection
specifications of the device before it is connected.
• The device may only be used within the specified limitations for voltage,
power and nominal rotation speed (see type plate).
• If required, only use extension cords that are appropriate for both the
device and the environment. If in doubt, ask an expert in electrical matters
• Never operate the device in flammable or explosive environments.
• If the power cable is damaged, immediately pull out the plug. Never use
the device if the powercable is damaged.
• When working with the device do not touch grounded objects (radiators,
water pipes etc.).
• If the device is not in use make sure the plug is pulled out.
• Make sure that the device is switched off before plugging in the mains
cable.
• Make sure that the device is switched off before unplugging it.
• Disconnect the power supply before transporting the device.
Risk of Cuts
Failure to comply with the following instructions will lead to serious
injury or death from cuts.
• Before starting the machine up, check all screws, nuts, bolts and other
fixtures to ensure that they are fitted tightly and make sure that all covers
