IMD Drive installation guide
R1724
- 17 -
SERAD S.A
X7: Digital I/O
Connector: Removable 8 ways, 3.81mm pitch
N°
Name
Type
Description
1
Q2
Out
Output 2, programmable : type NPN, 24 Vdc, 100mA
2
Q1
Out
Output 1, programmable : standard function DRIVE READY
3
Q1
Relay contact, N/O between terminals 2 and 3
4
DGND
0V digital I/O
5
I4
Inp
Input 4, programmable
6
I3
Inp
Input 3, programmable
7
I2
Inp
Input 2, programmable
8
I1
Inp
Input 1, programmable:standard function ENABLE
The output Q2 is NPN open collector: the load must be connected between
Q2 and +24V DC.
X8: High voltage supply
Connector: Removable 4 ways, 7.62mm pitch
N°
Name
Type
Description
1
PE
Supply earth
2
L1
Inp
Supply L1 for 230V and 400V
3
L2
Inp
Neutral for 230V or supply L2 for 400V
4
L3
Inp
Supply L3 for 400V
Care must be taken when making connection to connector X8.
Wait at least 5 minutes to allow the capacitors to discharge before remove connector.
The armoured motor cable must arrive directly on the terminals of the drive.
Connect the shield (on drive side) to the srew provided (see Front view of the drive).
