Sequoia LISST-Hydro, User Manual

Page: 16 / 57

10
Step 7: Select
Serial Port As the last setting to be completed before we can start sampling, we
must select the serial port that the instruments are connected to. Select
Settings, then click the Serial Port tab. In the dropdown menu, select
the Serial Port the instruments are connected to. Then click the OK
button.
Step 8: Start
Sampling
If the instruments have both been installed according to the installation
instructions (see separate installation manual), the clean water tank is
filled, the instruments are connected to the turbid source, and all
settings are as desired, it is now time to start sampling.
To start sampling, click the Start Button below the Control Panel display
in the LISST-Infinite Master Controller Software.
The Start button is the only way to start sampling with the LISST-
Infinite Master Controller Software.
Step 9: Stop
Sampling
You will notice that the Start button turns into a Stop button after you
start sampling. To stop sampling, click the Stop button. If you start
sampling after having stopped it, the new data will be appended to the
existing data files.
Step 10:
Observe
Collected Data
When the sampling has been started, the Current Values Display will
update with the data from each instrument as they have been received
and processed by the monitoring PC.
The system will display warning symbols and messages as needed
(see warnings and maintenance section).