Sequoia LISST-HOLO, User Manual

Page: 37 / 73

LISST-
HOLO User’s Guide
37
Advanced Settings
Additional reconstruction options are available under Options ->
Advanced Settings.
The only parameter that should be adjusted is the index of refraction. An
average value of 1.333 for water is set as the default. This should be
changed if the hologram was taken in air or in any other substance with
a different index of refraction.
The Offset, Pixel Size, and Wavelength should not be adjusted.
Set ROI and Reconstruct Buttons
Select the size of the ROI using the radio buttons in the lower left
corner.
After selecting the ROI size press the
‘Set ROI’ button.
The ROI box will appear as a blue square overlaid on the hologram. The
ROI can be moved to another location by moving the mouse over the
ROI, selecting it, and then moving it around to the desired location within
the hologram.