Step 13
Install Trim on End Walls
1.
Cut (3) three 5/8" thick sheets into (2) two 48"x48" pieces. Cut (1) one sheet into (2)
24"x96" pieces. Cut (1) one sheet into (2) two 24"x48" pieces. The remaining piece is not
used.
2.
Cut and install (2) two 1x4 -96"
white pine trim boards. Install
trim flush with siding on the front
and back walls. Cut trim flush
with he bottom of the siding.
3.
Repeat to install trim to the
opposite end wall panel.
straight edge
Step 12 Install Loft Flooring
14' End Wall
Front
Wall
1x4 Corner Trim
IMPORTANT: Trim Must Be Installed Before Installing Roof Gables!
1.
Install (2) two 84" long 1x4 white pine trim boards flush with the top of the loft flooring.
Install all trim using 6d galvanized box nails spaced 12" apart.
1x4 Trim
1-1/2" x 10" Filler
Depending on the pre-cut stud length and if the siding extends below the bottom plate,
you may have a space between the top of the siding and the loft floor. If necessary tack
nail or glue 1-1/2" x 10" fillers, included in the kit, to prevent the 1x4 trim from tipping
when nailing the trim. Space fillers 12" apart.
48" x 96"
48" x 96"
48" x 96"
24" x 96"
48" x 96"
48" x 96"
48" x 96"
24" x 96"
48" x 48"
48" x 48"
48" x 48"
24" x 48"
48" x 48"
48" x 48"
48" x 48"
24" x 48"
2.
Install sheets, per layout,
flush with the 2x4 wall plates.
Secure the flooring with 8d
galvanized spiral nails spaced
12" apart.
3.
Locate (2) two 3-1/2" x 48"
plywood filler strips. Install
these on top of wall frames
between loft floors.
48" Filler Strip
