Door Stop
Door Stop Extends 3/4"
Beyond Frame
Step 24 Install Door Stop on Left Door
Step 23 Install Door Trim
1.
Install 3-7/8" x 84" primed LP door jamb material to the sides of the door opening. Install door
jamb flush with the siding. Use 6d galv. nails.
2.
Install (2) two 48-3/4" long 1x4 trim boards and a 1x6 keystone across the top of the door
opening. Install the trim boards centered across the opening and 3/4" above the siding. The
exposed siding will serve as a door stop when the doors are closed. Use 6d galv. nails spaced
12" apart.
1x6 Keystone
48-1/2" Door Trim
84" LP
Door Jamb
3
Install (2) two 1x4-84-3/4" long trim
boards flush to the sides of the door
opening. Tack these boards with a couple
nails, you may want to reposition the trim
when you install the doors. Use 6d galv.
nails.
Siding Extends
3/4" Below Trim
1
Select the door without the pre-drilled
hole on long edge. Lay door face
down.
2.
Install a 4-1/2" x 83" long siding panel
as a door stop on right side of door.
The door stop should extend 3/4"
beyond the frame of the door and
flush with top of door. Use 1-1/2"
exterior screws spaced 12" apart.
