Step 19 Install Trusses
End Gable
End Gable
1.
Starting at the end wall without the door opening indicate with 'X' marks where the trusses will
be located. The last space will be wider than the first (21-3/8") space.
Mark 2x6 Plate on Front and Back Walls
2.
Install H1 truss hangers to the 2x6 truss plate.
Position the hanger on the line with the 'X' mark
in the opening. Install the hangers using 6d
common nails.
5.
Remove the 2x4-12' boards used to
brace the gable. As you progress setting
trusses, tack these boards to keep trusses
plumb. Don't remove the 2x4s until the
roof sheathing is applied.
4.
Set truss legs into hanger. The truss needs
to extend 1" beyond the 2x4 truss plate to
be in-line with the gable frames.
Use 1-1/2" hanger nails to secure the truss
to the metal hanger
2x4-12' Board
6.
Use another 2x4-12' board as a straight
edge to ensure the trusses are aligned
with the gable frame.
24"
21-3/8"
24"
24"
24"
24"
Truss Extends 1"
