2x4 Frame
1x4 Trim
Siidng
Inside Door Latch
Door Stop
Door Handle
Barrel Bolt on the
back of left door
Step 25 Install Doors
7.
Install a barrel bolt on the lower back of the door
to secure this door in place when closed. You
will need to drill a hole for the round shaft to
drop into.
8.
Install another barrel bolt at the top of the door.
Left Door
2.
Install 3-7/8" wide primed jamb material to the
sides of the door opening.
3.
Before fastening the hinges to the trim, temporarily
prop the doors in the opening. Leave a space at
the top and and between the doors and the side
trim to allow room for the doors to expand due
to humidity.
4
Determine position of hinges and install to side
trim with 2" screws.
5.
Install the window using the short white screws.
6.
Install door handle into the pre-drilled hole on
right side door. When the handle is turned the
inside latch will hold doors closed. Tighten set
screw to finish.
1.
Install (3) three 6" hinges to side of
the doors. To position the hinge,
hold the rectangular plate against
the frame. Use 2" black screws.
If your door opening is out of square, the space around the doors will not be even.
You can remove and re-position the side trim to make allowances for this. The side
trim does not have to be flush with the frame of the door opening. You can move the
trim in or out to make the door spacing equal.
