SenTech STC-MBS322U3V, Product Specifications

Page: 59 / 65

No.15S103-01
59/65
STC-MBS510U3V / STC-MCS510U3V / STC-MBS322U3V / STC-MCS322U3V
Specifications and Use
’s guide
DeviceRegistersStreamingEnd
Announce the end of registers streaming. This will do a register set validation for consistency
and activate it.
DeviceTemperatureSelector Selects the location within the device, where the temperature will be measured.
DeviceTemperature
Device temperature in degrees Celsius (C). It is measured at the location selected by
DeviceTemperatureSelector.
TimestampLatch Latches the current timestamp counter into TimestampLatchValue.
TimestampLatchValue Returns the latched value of the timestamp counter.
Name Description
SensorWidth Effective width of the sensor in pixels.
SensorHeight Effective height of the sensor in pixels.
SensorShutterMode Sets the shutter mode of the device.
WidthMax
Maximum width of the image (in pixels). The dimension is calculated after horizontal binning,
decimation or any other function changing the horizontal dimension of the image.
HeightMax
Maximum height of the image (in pixels). This dimension is calculated after vertical binning,
decimation or any other function changing the vertical dimension of the image
BinningSelector
Selects which binning engine is controlled by the BinningHorizontal and BinningVertical
features.
BinningHorizontalMode
Sets the mode to use to combine horizontal photo-sensitive cells together when
BinningHorizontal is used.
BinningHorizontal
Number of horizontal photo-sensitive cells to combine together. This increases the intensity (or
signal to noise ratio) of the pixels and reduces the horizontal resolution (width) of the image.
BinningVerticalMode
Sets the mode used to combine vertical photo-sensitive cells together when BinningVertical is
used.
BinningVertical
Number of vertical photo-sensitive cells to combine together. This increases the intensity (or
signal to noise ratio) of the pixels and reduces the vertical resolution (height) of the image.
DecimationHorizontal
Horizontal sub-sampling of the image. This reduces the horizontal resolution (width) of the
image by the specified horizontal decimation factor.
DecimationVertical
Vertical sub-sampling of the image. This reduces the vertical resolution (height) of the image by
the specified vertical decimation factor.
RegionSelector
Selects the Region of interest to control. The RegionSelector feature allows devices that are
able to extract multiple regions out of an image, to configure the features of those individual
regions independently.
RegionMode Controls if the selected Region of interest is active and streaming.
ImageComponentSelector Selects a component to activate data streaming from.
ImageComponentEnable Controls if the selected component streaming is active.
Width Width of the image provided by the device (in pixels).
Height Height of the image provided by the device (in pixels).
OffsetX Horizontal offset from the origin to the region of interest (in pixels).
OffsetY Vertical offset from the origin to the region of interest (in pixels).
PixelFormat
Format of the pixels provided by the device. It represents all the information provided by
PixelCoding, PixelSize, PixelColorFilter combined in a single feature.
PixelFormatInfoSelector Select the pixel format for which the information will be returned.
PixelFormatInfoID Returns the value used by the streaming channels to identify the selected pixel format.
PixelSize Total size in bits of a pixel of the image.
PixelColorFilter Type of color filter that is applied to the image.
ReverseX
This feature is used to flip horizontally the image sent by the device. The AOI is applied after
the flipping.
ReverseY
This feature is used to flip vertically the image sent by the device. The AOI is applied after the
flipping.