SenTech STC-MBS322U3V, Product Specifications

Page: 61 / 65

No.15S103-01
61/65
STC-MBS510U3V / STC-MCS510U3V / STC-MBS322U3V / STC-MCS322U3V
Specifications and Use
’s guide
UserOutputValue Sets the value of the bit selected by UserOutputSelector.
StrobeOutDelay Delay of StrobeOut signal when LineSource is set to StrobeOut(us).
StrobeOutOnTime Duration of StrobeOut signal when LineSource is set to StrobeOut(us).
TriggerOutDelay Delay of TriggerOut signal when LineSource is set to TriggerOut(us).
TriggerOutOnTime Duration of TriggerOut signal when LineSource is set to TriggerOut(us).
LineDeviceResetMode Sets the Line device reset mode.
LineDebounceTime Sets the value of the input line debouncer time.
Name Description
CounterSelector Selects which Counter to configure.
CounterEventSource Select the events that will be the source to increment the Counter.
CounterEventActivation Selects the Activation mode Event Source signal.
CounterResetSource Selects the signals that will be the source to reset the Counter.
CounterResetActivation Selects the Activation mode of the Counter Reset Source signal.
CounterReset
Does a software reset of the selected Counter and starts it. The counter starts counting events
immediately after the reset unless a Counter trigger is active. CounterReset can be used to
reset the Counter independently from the CounterResetSource. To disable the counter
temporarily, set CounterEventSource to Off.
CounterValue Reads or writes the current value of the selected Counter.
CounterValueAtReset
Reads the value of the selected Counter when it was reset by a trigger or by an explicit
CounterReset command.
CounterDuration Sets the duration (or number of events) before the CounterEnd event is generated.
CounterStatus Returns the current status of the Counter.
CounterTriggerSource Selects the source to start the Counter.
CounterTriggerActivation Selects the activation mode of the trigger to start the Counter.
Name Description
EventSelector Selects which Event to signal to the host application.
EventNotification
Activate or deactivate the notification to the host application of the occurrence of the selected
Event.
Name Description
EventExposureEnd
Returns the unique identifier of the ExposureEnd type of Event. This feature can be used to
register a callback function to be notified of the event occurrence. Its value uniquely identifies
the type of event that will be received.
EventExposureEndTimestamp
Returns the Timestamp of the ExposureEnd Event. It can be used to determine precisely when
the event occured.
Name Description
EventExposureStart Returns the unique Identifier of the Exposure Start type of Event.
EventExposureStartTimestamp Returns the Timestamp of the Exposure Start Event.