Sentec LuMon, Service Manual, Page: 27 / 33

Disposal
Service Manual for the LuMon™ System 27 of 33
7 D
ISPOSAL
Dispose all parts of or removed from the LuMon™ System according to your institution’s protocol and/or local regulations.
Products containing electronic parts (LuMon™ Monitor, its power cord, belt connector s , and belts) require special disposal.
Incorrect disposal may lead to serious environmental pollution.
N
OTE
SenTec is dedicated to helping protect the natural environment and to helping ensure the continued safe and effective use of this
product through proper support, maintenance, and training. Therefore, SenTec’s products are designed and manufactured to
comply with relevant guidelines for environmental protection. If the product is properly operated and maintained, it presents no
environmental risks. However, the product may contain materials that could be harmful to the environment if disposed of
incorrectly. Use of such materials is essential to performing the functions of the product, and to meeting statutory and other
requirements.
7.1 LuMon™ Monitor
Return the LuMon™ Monitor to your local SenTec representative or dispose it according to local regulations.
N
OTE
If equipment is send to a SenTec Authorized LuMon™ Technician , local SenTec representative or SenTec AG please refer to
section ‘instructions for repackaging and shipping’ of the User’s Guide [1].
A complete ‘Certificate of Disinfection’ [6] and, if applicable, the ‘Repair or Investigation Request Form’ [7] must be provided.
7.2 Belt connectors
Dispose the belt connectors according to local regulations.
N
OTE
The copper contained can be recycled.
7.3 Belts
Dispose the belt according to local regulations.
7.4 Contact medium
Dispose ContactAgent pressurized spray cans and NeoContactAgent spray bottles according to local regulations. Make sure that
only empty pressurized cans are disposed.