
Maintenance/Safety and Functionality Tests
Service Manual for the LuMon™ System
13 of 33
3.2
LuMon™ Monitor
3.2.1
Cleaning and Disinfection
For cleaning and disinfection procedures for the LuMon™ Monitor refer to section ‘cleaning and disinfection’ of
the User’s Guide
3.2.2
Visual Inspection
Visually check the entire LuMon™ Monitor for possible damages.
N
OTE
If you detect damage, the LuMon™ Monitor needs to be repaired. Contact
SenTec Authorized LuMon™
Technicians.
3.2.3
Labeling
Check presence/legibility of the label on the rear panel (
): Labels of all ports, connectors and
ON/OFF switch and the marking plate. Example labels are shown below.
Figure 3-2: Labeling – LuMon™ Monitor
A.
SenTec logo
B.
Product name
C.
Manufacturer symbol and address
D.
EU Authorized Representative
E.
Reference symbol and number
F.
UDI data matrix code and human
readable
G.
Serial number symbol and number
H.
Cut out (window for battery status LED)
I.
Battery symbol
J.
Follow instructions for use
K.
CE (‘Conformité Européene’) label and
notified body number
L.
IP (ingress protection class) code
M.
Dispose of according to Council
Directive 2012/19/EU
N.
Medical Device symbol
O.
Prescription Device
P.
Date of manufacture symbol and
manufacturing date
Q.
Power inlet information
N
OTE
If the label is not present/legible then contact
SenTec Authorized LuMon™ Technicians.