The Senstar 100 Startup program
3 - 4 • • • Senstar 100 Installation guide
3. Press any key to return to the Explain Senstar 100 Startup Program menu.
4. You can use the
F12
Exit Startup Program to exit the Senstar 100 Startup
Program and begin Senstar 100 alarm processing.
Beginning Senstar 100 alarm processing
You MUST complete the Startup Program Functions F1, F2 and F3
before you can begin Senstar 100 alarm processing.
1. Remove the boot floppy disk.
2. Turn the computer OFF.
3. Turn the computer ON.
4. The computer boots from the hard disk.
5. Follow the onscreen instructions to begin the alarm processing operations.
Explain Senstar 100 Startup Program
E
Warning: This function performs a high level format of the hard
disk. All data presently on the hard disk is destroyed.
xplanation for: F1 - Initialize Hard Disk
Note that the physical Node ID
is set here and the CU
must be restarted before a physical Node ID other than
1 will take effect.
Press any key to continue
>
Answer initialize queries as follows:
Do NOT use 16 bit libraries as default.
Set the computer's Real Time clock to use GMT (UTC).
Set up for 4 consoles.
Do NOT answer YES if using a mouse, even if you plan to.
Do NOT answer YES to configure a network, even if you plan to.