SENSTAR 100, Installation Manual

Page: 80 / 128

Hardware setup
4 - 8 • • • Senstar 100 Installation guide
You cannot select the keyboard type until you have initialized
the hard disk and loaded the application software and site
data. For information about initializing the hard disk, refer to
Initializing the hard disk , page 3-5
. For information about loading
the application software, refer to
Loading the application software ,
page 3-11
. For information about loading the site data, refer to
Loading the site data , page 3-13
.
1. Press F3 .
The
Select Senstar 100 Keyboard Type
menu displays.
2. Press the function key that corresponds to the type of keyboard the system
will use.
3. When the procedure is complete, follow the prompts to return to the
Setup
Hardware menu.
Set active boot partition
You can use the F4 Set Active Boot Partition function to specify the hard disk
partition from which the system will boot. You can use this function to change the
boot partition of your hard disk, provided that more than one valid partition
exists.
Select Senstar 100 Keyboard Type
This procedure is used to select the keyboard type used
for entering text. The possible selections are:
F1 English
F2 French
F3 German
F4 Italian
F5 Spanish
F6 Arabic
F7 Quit
Enter Selection >