Saving/loading user data
Senstar 100 Installation guide • • • 4 - 13
2. Do one of the following:
•
To copy data to a floppy disk, insert a formatted floppy disk into the
floppy drive, and press
F1
.
OR
•
To load data onto the hard disk, insert the floppy disk into the floppy
drive, and press
F2
.
3. Press any key.
A message displays onscreen after the user data has been saved or loaded.
4. Remove the floppy disk from the drive and label it.
5. Press any key to display the
Senstar 100 Startup Program
menu.
Saving and Loading User Data
This function is used to save and restore user data to/from
diskette. Only QNX4 data is handled here. For loading QNX2
data, see File and Data Utilities (F5) under the Senstar 100
Setup menu.
1) Site data is saved using the Map and Data Creation S/W package.
2) Site Creation data is saved using the Map and Data creation
S/W package.
Note:
Press ESC to exit, any other key to continue >