Saving/loading user data
4 - 12 • • • Senstar 100 Installation guide
Saving/loading user data
You can use the
F10
Save/Load User Data function to make backup files of data
defined by the user in the
Supervisor
and
Setup
menus (alarm prompts,
checklists, alarm causes, passwords, etc.). You can also load data that was saved to
a floppy disk onto the hard disk using the F10 function.
The Save/Load User Data function applies only to QNX4 user
data. If you are loading QNX2 user data, use the Save/Load
User Data function that is found in the
Senstar 100 Setup
menu, under
File and Data Utilities
. This will perform data
conversions, if required.
Make backup disks whenever you create or change user data.
Always maintain current backup files of all Senstar 100 data.
1. Press
F10
.
The
Saving and Loading User Data
screen displays.