Sensors & Software pulseEKKO Pro User Manual Download Page 73 | Manualshive

Page: 73 / 78

background image

pulseEKKO PRO

3-System Setup Parameters

63

3.6

DVL Setup Menu

3.6.1 Set DVL Time and Date

The date and time are saved with the data files. The DVL date and time setting can be changed by moving
to one or more of the appropriate fields and editing the current setting. The LEFT and RIGHT arrows are
used to move between fields. To change any of the numbers or months, use the UP and DOWN arrows to
increase or decrease the value. When the desired date and time are set, press ENTER to save the
changes.

Figure 3-22: DVL set time and date screen.

3.6.2 Set DVL Transfer Mode

When transferring data from the DVL to a PC (Section 8.1: P105), two different types of PXFER cable are
available, Normal and Turbo. For the data transfer to be successful, the DVL Transfer Mode specified in
this menu must be set to the correct cable. Normal PXFER cables have black bands near the ends while
the Turbo PXFER cables have pink bands near the ends.

3.6.3 Set DVL into Upgrade Mode

This option is used to upgrade the software on the DVL. DO NOT press this button until told to do so in the
instructions accompanying the software upgrade. If you do accidentally enter this menu item, the only way
to exit is to disconnect the power to the DVL.

«
...
71
72
73
74
75
...
»

Summary of Contents for pulseEKKO Pro















































































Reviews:

No comments

Related manuals for pulseEKKO Pro

Brand: Raytheon Pages: 135

Brand: Raymarine Pages: 108

Brand: Raymarine Pages: 3

Brand: Acconeer Pages: 36

Bearcat 980 SSB

Brand: Uniden Pages: 24

Brand: König Electronic Pages: 8

Brand: Majorcom: Pages: 20

Brand: IPMobileNet Pages: 41

Brand: Revo Pages: 80

Brand: Vertex Standard Pages: 80

Brand: Magnetrol Pages: 52

Brand: Magnetrol Pages: 61

Brand: Radionette Pages: 168

Brand: Kirisun Pages: 36

Brand: Kirisun Pages: 55

Brand: Roadstar Pages: 42

Brand: Roadstar Pages: 46

Brand: auna Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands