Sensors & Software pulseEKKO Pro User Manual Download Page 25

Page: 25 / 78

pulseEKKO PRO

2-System Assembly and Startup

2.4.2 Mounting Transducers to the Skid Plate

Skid plates are sized to fit a pair of transducers positioned side by side.

Figure 2-20: Mounting the transducers onto the skid plate. The skid plate assembly consists of the bottom piece and two side

flanges (top). The transducers are placed onto the bottom skid plate with the labels facing the same direction (middle) with the

receiving transducer (R500) in front of the transmitting transducer (T500). The transducers are held onto the skid plate by placing

the two flanges over the mounting posts. The above images show the assembly of the 500 MHz transducers onto the 500 MHz skid

plate. The procedure for the 250 and 1000 MHz transducers onto their skid plates is exactly the same.

Summary of Contents for pulseEKKO Pro














































































Search results

Summary of Contents for pulseEKKO Pro

Reviews:

Related manuals for pulseEKKO Pro

Brands by name

Popular brands

Sensors & Software pulseEKKO Pro, User Manual

Search results

Summary of Contents for pulseEKKO Pro

Reviews:

Related manuals for pulseEKKO Pro

Brands by name

Popular brands