pulseEKKO PRO
2-System Assembly and Startup
13
d) After attaching the dual fibre optic cables to the transmitter and receiver, the other end of the
fibre optic cables are attached to the fibre optic converters on the control module (Figure 2-
18). The fibre optic cable from the transmitter connects to the fibre optic converter labelled 4.
The fibre optic cable from the receiver connects to the fibre optic converter labelled 5. Note
that the fibre optic connection at the control module is keyed and will only attach properly in
one orientation.
Figure 2-18: The dual fibre optic cable from the transmitter and receiver attaches to the electrical to fibre optic converters on the
control module. The fibre optic cable from the transmitter connects to the control module receptacle labelled 4 while the fibre optic
cable from the receiver connects to the control module receptacle labelled 5. This connection is keyed so it will only attach when
the fibre optic cable is in the orientation shown.
