6
REF 360-0040-01 (F)
READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE
Failure to read, understand, and comply with ALL accompanying literature, product labels, and warnings could result in property
damage, severe personal injury, or death.
Read and understand ALL applicable environmental health and safety laws and regulations. Ensure complete compliance with ALL applicable
laws and regulations before and during use of this product.
DO NOT remove, cover, or alter any label or tag on this product, its accessories, or related products.
UNDER NO CIRCUMSTANCES should this product be used except by qualified, trained, technically competent personnel.
DO NOT operate this product should it malfunction, require repair, or have a cracked or broken case. DO NOT repair or modify, except
as specified in Operation Manual. Service to be performed by Sensidyne Authorized Service Departments only.
Use ONLY specified Sensidyne parts when performing maintenance procedures described in this manual. Intrinsic safety certifications
become void by substitution of components, unauthorized repair or alteration.
This product is intended for both indoor and outdoor use when protected from splashed or wind blown liquids. The unit is not
waterproof so NEVER submerge the unit in water. Pump failure or faulting may result.
Possible static hazard. Do not rub with dry cloth.
DO NOT clean, open case, charge or replace batteries in an explosive atmosphere.
This product uses rechargeable Nickel-Cadmium or Nickel-Metal-Hydride batteries. ALWAYS fully charge before use. Use only battery
pack and chargers specified in Operation Manual. DO NOT insert any foreign objects into contact slot. Shorting contacts will blow
protective fuse. DO NOT use BMS-200 charger to charge ATEX battery version pumps.
Some models of this product use Nickel-Cadmium batteries which may not be disposed to normal landfill due to the Cadmium content.
Dispose of Nickel-Cadmium batteries only according to local and federal regulations.
Maximum Allowable Charging Voltages (U
m
):
GilAir-3: 6 V
rms
(
≥
250 mA)
21 V
rms
(< 250 mA)
GilAir-5: 7 V
rms
(
≥
250 mA)
21 V
rms
(< 250 mA)
If the equipment is likely to come into contact with aggressive substances, then it is the responsibility of the user to take suitable
precautions that prevent it from being adversely affected, thus ensuring that the type of protection is not compromised. Examples of
aggressive substances are acidic liquids or gases that may attack metals, or solvents that may affect polymeric materials. Examples
of suitable precautions are regular checks as part of routine inspections or establishing from material data sheets that it is resistant to
specific chemicals.
DO NOT operate with a dirty or blocked inlet filter or kinked tubing. Pump failure or faulting may result.
Caution: Both charger and battery become warm during charging.
If further translation is required, please contact Schauenburg Electronic Technologies GmbH, the Sensidyne EU Authorized Representative.
WARNINGS
