33
REF 360-0040-01 (F)
APPENDIX E
MULTI-FLOW MODULE
E.1 Overview
The Multi-Flow Module is suitable for multiple tube sampling between 1 and 750 cc/min and can be used in
conjunction with the Gilian Universal Tube Holder System to perform multiple tube sampling.
E.2 Installing The Multi-Flow Module
NOTE
Install the Multi-Flow Module in a clean environment with the pump turned off.
• See Figure E.1
1)
Remove the airboss cover on top of the pump [1]. Make sure the o-ring seals [5] are properly seated.
2)
Place the Multi-Flow Module [2] onto the airboss opening. Make certain the mating boss clears the case
opening prior to securing.
3)
Secure the Multi-Flow Module with the mounting screws [3].
Do not overtighten
.
Figure E.1
Installing The Multi-Flow Module
1
2
3
4
5
